Batch 3D Printing and Low-Volume Production
Tens to thousands of identical parts, printed in parallel on our print farm. No tooling, no mold wait, and you can change the design between batches.
★★★★★5.0 from 40 Google reviews · Made in Cambridge, Ontario · NDA on request
Trusted by engineers and buyers at
What clients batch with us
Production runs without tooling
Casting molds and forms, up to 77% cheaper than wood tooling.
Pre-production prototypes
Hundreds of field-test units before you commit to injection mold tooling.
End-use production parts
Brackets, trays and housings in PETG, PC, PA6-CF and SLS nylon.
Replica products and display pieces made at volume and finished to match.
Carbon fibre nylon sliders and guides, re-printed on demand.
Identical fixtures for every station, re-printed when a design changes.
Consistency
Part 500 matches part 1
The hard part of batch printing is not speed. It is making every part the same.
-
First-article approval
We print one, you approve it, then we run the batch with the same settings.
-
Locked print profiles
Same material, settings and orientation across every machine in the run.
-
Checked as we go
Parts are checked against your file throughout the run, not just at the end.
-
Packed to your spec
Counted, bagged or kitted the way your line or event team needs them.
Batch printing vs injection molding
When printing beats tooling
Printing wins below a certain quantity, and while the design is still changing. We will tell you where your part crosses over.
| Compare | Batch 3D printing | Injection molding |
|---|---|---|
| Tooling cost | None | A mold must be made first |
| First parts | Days | Weeks, after the mold is made |
| Design changes | Change the file for the next batch | Modify or remake the mold |
| Cost per part at high volume | Higher | Lower |
Case studies
Batch jobs we have delivered
Scaling Precast: 120 Complex Molds Delivered in 5 Days
How 3D printed PLA tooling cut precast mold costs by up to 77%.
Validating AgTech: 600 Flame-Retardant Prototypes
Large-format PC-FR parts validated in the field before injection mold tooling.
Replica Don Julio Bottles for the FIFA 2026 World Cup
Display-quality replicas, produced at volume and finished in metallic gold.
Batch production questions
From tens to thousands. Our largest run so far was 1,130 replica bottles for the FIFA 2026 World Cup.
It depends on part size and quantity. As a guide: 120 precast molds took 5 days, and a 100-part production order took 5 days.
Once the design is final and volumes are high enough to pay back the mold. We will tell you where your part crosses over.
Yes. Larger runs share setup and print time across more parts, so the per-part price comes down. Your quote shows the price at the quantities you ask about.
Yes. We keep your approved file and print settings on record, so a re-order matches the first batch.
Tell us the quantity and the date.
Upload your file with the quantity you need. We will quote the batch, the per-part price and the turnaround.